AXI Model Motors Flying-Hobby Page 13 Review

Flying-Hobby

LENSMAN-18 GIMBAL MOUNTING FRAME (FOR STREAK 800PRO)

Feature	- Used for
Lensman-18 Camera 3-Axis Gimbal (For Streak 800) Model	ALLENS-18A

Item Included:, 2x Fiber Glass Lensman-18 Gimbal Mounting Fame 2.5mm (Refer to the photo),

to mount it onto Streak 800Pro Hexacopter. - Made of ...

Flying-Hobby

MIK4357 MINI V-BAR V 5.2 FLYBARLESS STABILIZATION SYSTEM

- If using a primary receiver, Mini V-Bar is compatible with the following 2.4GHz receivers	Spektrum, Jeti, Fasst.
- Dimensions	28 x 37 x 13 mm
- Weight	11 g
Contents	- Mini V-Bar
- Patch Cables	3.1" For use with a primary receiver (if you opt NOT to use Satellites)

Compatibility Notes:, - Mini V-Bar Blueline can, Overview:, The Mini V-Bar is the worlds smallest and lightest 3-axis virtual flybar system. It is designed to fit any small indoor helicopter. Despite its size, the Mini V-Bar is equipped with top-quality sensors and will thus satisfy the highest performance expectations. When light weight is a priority, the Mini V-Bar is your best choice. New version 5.2 Express Software allows for simplified programming and very easy flight tuning!, model helicopters with only a few limitations. Do not use the Mini V-Bar in the following types of helicopters:, - Large Scale heli's, Features:, - Programming is done via Control Panel or via USB using the PC software., Specs:, - 3-Axis Gyro System,

Aside from the nice new Blue case, the Mini V-Bar ...

Flying-Hobby

MIKADO LOGO 600SE ELECTRIC HELICOPTER KIT - FBL OPTIONS

Specifications	- Motor mount
- Rotor Blades	600mm to 690mm
- Main gear ratio	8,1
- Weight	3,2 kg and up
- Battery	8S to 10S LiPoly
pinion	MIK4411 11 tooth
Cyclic servos	FutabaBLS 451 or JR 8717 or BLS 253
Tail Servo	Futaba BLS 251 or JR 8900G
ESC	Kontronics Jive120HV or Casle Creations Ice 160 HV
Battery	10cells or 12cells 5000MAH

Superlight, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glassfiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., The main advantages of the new Herringbone gear design are:, - Considerably more transmission efficiency, Very smooth running, Extremely low noise level, Suggested Kit Combination:, , motor:, Scorpion HK-4035-560(10cell) or xera-4030-560 (10cells), Note:, Mikado LOGO kits do not come with a pinion, tail blades, or main blades. You must choose your own pinion that matches your motor to obtain the headspeed that you desire. Please use our headspeed calculator if you need help figuring out what pinion you need!,

This is the Logo 600SE V-Bar Flybarless version kit. The ...

Flying-Hobby

LOGO 500 SE ELECTRIC HELICOPTER KIT WITH VBAR ROTORHEAD

Rotor diameter	1190mm to 1350mm.
Rotor blades	550mm to 620mm.
Gear ratio main rotor	8,1
Weight	2.5kg - 3.2kg Depending on power system.
Battery	6S to 10S Lithium Polymer.

The differences between the Logo 500 and the Logo 500 SE are:, - Longer boom, belt, and tail control rod to accommodate up to 620mm Rotor Blades, Super-light, extremely rigid mainframe:, The mainframe consists of a right and a left frame made from glass fiber-reinforced polymer. A number of components which are usually separate parts are fully integrated into this frame, and do not have to be bought separately, for example bearing case, battery tray and servo mounting plate. There is ample space for any brand of available battery. The mainframe offers enough room for motors of up to 56 mm in diameter., Herringbone main gear:, Experience of previous years shows that conventional gear trains have reached their limit with regard to performance. The increasing power made available by latest Lipoly batteries calls for new concepts. We are proud to present this new gear technology, which includes herringbone gears. This type of gear has never before been used in a model helicopter., Its main advantages are:, - Considerably more transmission efficiency, Features:, - Constant tail drive, Specifications:,

The Logo 500 SE will perform extremely well with a ...

Flying-Hobby

T-REX 500 PRO DFC COMBO

● Length	868mm
● Height	275mm
● Main Blade Length	425mm
● Main Rotor Diameter	978mm
● Tail Rotor Diameter	206mm
● Motor Drive Gear	12T
● Main Drive Gear	134T
● Autorotation Tail Drive Gear	145T
● Tail Drive Gear	36T
● Weight(With Motor)	1210g

Remark :, All T-REX 500 DFC Combo have change to this canopy -, Specification(T-REX 500 PRO DFC) :, ●Features, Specification(T-REX 500 PRO DFC) :, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500PRO DFC Kits Set X1, Radio transmitter and electronic equipment required for assembly:, ●Transmitter(7-channel or more, helicopter system),

HC5112 ●Equipped with the low CG DFC rotor head, effectively ...

Flying-Hobby

T-REX 500E PRO SUPER COMBO

Specification(T-REX 500E PRO)	● Length
● Height	308mm
● Width	161mm
● Main Blade Length	425mm
● Main Rotor Diameter	978mm
● Tail Rotor Diameter	206mm
● Motor Drive Gear	12T
● Main Drive Gear	134T
● Autorotation Tail Drive Gear	145T
● Tail Drive Gear	36T
● Weight(With Motor)	1295g

Specification(T-REX 500E PRO) :, ●Preface, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500E PRO Kits Set X1,

Use your reward points to get a good discount. 1.Following ...

Flying-Hobby

FUTABA BLS452 BRUSHLESS SERVO

Torque	6.0V
Speed	0.14 Sec/60 Deg
Dimensions	1.6 x .8 x 1.5" (40.6 x 20.3 x 38mm)
Weight	58g

FEATURES:, Equipped with a Brushless motor that lasts longer and operates at a lower temperature than Brushed motors, SPECS:,

This is the Futaba BLS452 Brushless Digital High Torque Metal ...

Flying-Hobby

T-REX 500E PRO JR XG8 READY TO FLY

Specification(T-REX 500E PRO)	● Length
● Height	308mm
● Width	161mm
● Main Blade Length	425mm
● Main Rotor Diameter	978mm
● Tail Rotor Diameter	206mm
● Motor Drive Gear	12T
● Main Drive Gear	134T
● Autorotation Tail Drive Gear	145T
● Tail Drive Gear	36T
● Weight(With Motor)	1295g

Included:, ●T-REX 500E PRO Kits Set X1, Specification(T-REX 500E PRO) :, ●Preface, ● Drive Gear Ratio: 1:11.17:4.03, Accessories:, ●T-REX 500E PRO Kits Set X1,

●Aluminum Tail Boom X1 ●425 Carbon fiber blades X1 ●500MX ...

Flying-Hobby